新闻动态   News
联系我们   Contact
搜索   Search
你的位置:首页 > 新闻动态 > 产品新闻

圆形水浴氮吹仪常见故障及简易排除方法

2017-07-12 14:34:28      点击:

圆形水浴氮吹仪常见故障及简易排除方法

一.注意事项及日常维护:

1.使用前请检查电源插座是否良好接地(仪器附件配备专用插座检测器),若没有请使用足够粗度导线将分体温度控制器与大地连接!

2. 应保持柱箱部件的清洁,不用时请切断电源。

3.使用水质以外热媒质时,请注意考察该媒质的物理化学特性,避免其使用温度及溶解特性对本仪器塑料材质部件的损坏,如有必要请与本公司联系咨询,包括按需改装订制。

二.常见故障及简易排除方法:

1.开机面板不亮:检查插座电源及保险丝;

2.显示“eeee“,铂电阻接线开路或短路,返厂维修;

3.温度波动大:改动了内部参数,还原出厂记录值即可;

4. 上述问题您无法解决时,请与经销商或厂家联系。

1. Precautions and daily maintenance:

1. Please check whether the power socket is well grounded before using. If not, please use enough thick wire to connect the temperature controller to the earth.

2. Keep the container parts clean and cut off the power when not in use.

3. When using the outside heat medium water quality, please pay attention to examine the physical and chemical properties of medium, avoid using temperature and its dissolution characteristics of this instrument plastic parts is damaged, if necessary, please contact with the company consulting, including on-demand customized.

Ii. Common failures and easy elimination methods:

1. The boot panel is not bright: check socket power and fuse;

2. Display "eeee", platinum resistance wiring or short circuit, return to factory maintenance;

3. Large temperature fluctuation: changed internal parameters and restored the factory record value;

If you cannot solve the above problem, please contact with the distributor or manufacturer.

联系电话:183 2100 4009-刘俊--Q Q:2851513071

产品三包,含17%增值税票含运费 送货上门,保修1年,终身维护,欢迎咨询订购。


氮吹仪生产批发     氮吹仪种类     氮吹仪投标参数       实验室氮吹仪